PENDINGMECM/SCCM showing no reports under Monitoring/Reports

[lalajee2018]

On new build sccm server I cant seem to get the reporting work.

I try following steps

1. Remove Report role from sccm
2. Uninstall Report Services
3. Reboot Server
4. Reinstall Report Services
5. Configure Report Services
6. Reinstall the Report Service Role in ConfigMgr

I still see following errors in rrsp.log

1. Wait timed out. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
2. Updating SRS Configuration. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
3. Checking reporting server health. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
4. Successfully created srsserver instance to monitor reporting service. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
5. Reporting Services URL from Registry [http://SCCM/ReportServer/ReportService2005.asmx] SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
6. Client found response content type of '', but expected 'text/xml'.~~The request failed with an empty response. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
7. (!) SRS not detected as running SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
8. Failures reported during periodic health check by the SRS Server SCCM.Domain.co.uk. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
9. Verifing registry change notification is configured. SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)
10. Waiting for change or shutdown for 1 minutes SMS_SRS_REPORTING_POINT 27/09/2022 15:03:13 4168 (0x1048)

[Garth]

Did you check to see if SSRS is working correctly?

[lalajee2018]

Did you check to see if SSRS is working correctly?

ssrs log show errors (which you can see above)
ssrssetup log show it was installed without any issue

[Garth]

ssrs log show errors (which you can see above)
ssrssetup log show it was installed without any issue

Did you browse to the website? if this is NOT working then either will CM be able to do anything.

[lalajee2018]

Did you check to see if SSRS is working correctly?

ssrs log show errors
ssrssetup log show it was installed without any issue

Did you browse to the website? if this is NOT working then either will CM be able to do anything.

I can visit Reports without any issue but ReportServer show erorr

This page isn't working at the moment

sccmserver can't currently handle this request.


HTTP ERROR 500

[Garth]

If you can't server to the reportserver url then SSRS is not properly setup. You will need to fix that first before RP can work.

[lalajee2018]

If you can't server to the reportserver url then SSRS is not properly setup. You will need to fix that first before RP can work.

Any fix I try, get same issue.

What do I need to do to get this fixed.

I removed SSRS role and application but still same issue after the install.

I also remove the database and remove/disable anti virus software

[lalajee2018]

this is what I get when I try to access reportserver url

[lalajee2018]

Anything else I can try

[Muneer Jahangeer]

Ensure if you logged in as a domain administrator instead of a local admin account.

[lalajee2018]

Ensure if you logged in as a domain administrator instead of a local admin account.

I have

[Muneer Jahangeer]

Do you see any error here - Click onMonitoring, expandSystem Status, selectComponent Status,and look forSMS_SRS_REPORTING_POINT.

Also ensure your default "80" is not blocked by other apps.

[lalajee2018]

Do you see any error here - Click onMonitoring, expandSystem Status, selectComponent Status,and look forSMS_SRS_REPORTING_POINT.

Also ensure your default "80" is not blocked by other apps.

I have disabled antiversion on machine/remove it but still same issue

[hth华体会体育全站]

Can you remove the reporting services role and follow this guide to set it up correctly -//www.photo-critics.com/install-sccm-reporting-services-point-ssrs/
If you still encounter the same issue, we will further troubleshoot it.

[lalajee2018]

Can you remove the reporting services role and follow this guide to set it up correctly -//www.photo-critics.com/install-sccm-reporting-services-point-ssrs/
If you still encounter the same issue, we will further troubleshoot it.

I have removed SSRP and SQL database. Then Install it with above guide but still same issue

When I try to access ReportServer URL i get error 500 but Reports URL works fine


I have removed antivirus/disabled but still same issue
SSRP and sql is on same box
Firewall ports are open

[hth华体会体育全站]

In that guide which I sent you, did you configure the Web Service URL and Web Portal URL?. Also, do you see the report server DB created in the SQL server?.

[lalajee2018]

In that guide which I sent you, did you configure the Web Service URL and Web Portal URL?. Also, do you see the report server DB created in the SQL server?.

I did

[lalajee2018]

[Muneer Jahangeer]

I suspect the issue may be an in-built account. Can you change to a domain account and restart service? Also please ensure whether you have assigned correct permission to the domain account?

[lalajee2018]

I suspect the issue may be an in-built account. Can you change to a domain account and restart service? Also please ensure whether you have assigned correct permission to the domain account?
View attachment 4806

When I used my account it worked but when I use NT SERVICE\SQLServerReportingServices i get that error.