PENDINGClient installation Fail BG error context is 2 Error: 0x80200010

[Kook]

in sccm 2002 siteserver
i have issue with
Windows 10 1903 1909 2004 and higher unable to as below
1.install client
2.deployapplication
3.ADR
But Windows 1607,1703,1709,1803 and 1809 it working.

Download Update: A recoverable error has occurred. A retry attempt will be made. Error: 0x80200010, Description There are currently no active network connections. Background Intelligent Transfer Service (BITS) will try again when an adapter is connected.
, Context: The error occurred in the Background Intelligent Transfer Service (BITS) queue manager.
.

[derhoeppi]

Hi, i‘m searching for a solution for the same problem. In my environment we upgraded pur sccm clients from Windows 10 1803 to 2004. Before it works perfect but yet the clients does not download policies or applications. The DataTransferService.log shows errors that downloads are not possible- 0x80200010. Same error if i push a client installation. My clients has multiple nics but only the sccm subnet nic has a default gateway. This gateway is also pingable.

Any idea?

[derhoeppi]

I tested at a client with only two nics. First one (communication to sccm) has a default gateway. The second one was withiout a gateway. If i add a gateway - bits would work as expected.

[derhoeppi]

@Kook: Can you take a look with "Get-NetConnectionProfile" in Powershell.

[Kook]

Hi, i‘m searching for a solution for the same problem. In my environment we upgraded pur sccm clients from Windows 10 1803 to 2004. Before it works perfect but yet the clients does not download policies or applications. The DataTransferService.log shows errors that downloads are not possible- 0x80200010. Same error if i push a client installation. My clients has multiple nics but only the sccm subnet nic has a default gateway. This gateway is also pingable.

Any idea?

it same issue gateway can pingable, i try fix gateway it's not work. it's not issue from gateway.
Because this gateway can be used by other clients. (1703, 1709, 1803, 1809 it's working).

[derhoeppi]

Can you try to run Get-NetConnectionProfile in Powershell. My problem should be that the IPv4Connectivity shows NoTraffic. With that one BITS should not work.

[Kook]

Can you try to run Get-NetConnectionProfile in Powershell. My problem should be that the IPv4Connectivity shows NoTraffic. With that one BITS should not work.

这不是工作。请帮我没有这个问题。

[Kook]

Hello Everyone,
july 2021, this issue it not fix
请帮我没有这个问题。

[Garth]

Hello Everyone,
july 2021, this issue it not fix
请帮我没有这个问题。

Have you open a support case with MS on this? If not it will never get fixed.

[Kook]

Have you open a support case with MS on this? If not it will never get fixed.

I tried open a support case with MS, this issue it not yet solve.

[Garth]

I tried open a support case with MS, this issue it not yet solve.

Then you need to elevate the support case with your TAM. They can get the next level involved.

[Danny_Goodwin11]

in sccm 2002 siteserver
i have issue with
Windows 10 1903 1909 2004 and higher unable to as below
1.install client
2.deployapplication
3.ADR
But Windows 1607,1703,1709,1803 and 1809 it working.

Download Update: A recoverable error has occurred. A retry attempt will be made. Error: 0x80200010, Description There are currently no active network connections. Background Intelligent Transfer Service (BITS) will try again when an adapter is connected.
, Context: The error occurred in the Background Intelligent Transfer Service (BITS) queue manager.
.

HelloKook,

The error0x80200010will occur if the Background Intelligent Transfer Service (BITS) is not responding due to proxy settings that do not support the HTTP/1.1 protocol. It usually appears when you try to connect to the Microsoft Windows Update.

If you're looking to fix the error0x80200010during theSCCM client agentinstall, the below steps will assist you in troubleshooting the issue,

• Firstly, press theWin logo + Rkeys to open theRuncommand.
• Then,typethe below command ina Rundialog box to access Network connections,

ncpa.cpl

• Next, right-click theEthernetadapter and clickProperties.
• Now, select theInternet Protocol version 4TCP/IPv4 item and clickProperties.

If there's no default gateway address is specified, then the ccmsetup.log file shows up as "There are currently no active network connections."

• Now,enterthe correct default gateway address and clickOKto apply.
• Then, open theccmsetup.logfile using the below path to check client agent has successfully downloaded the files viaBITS,

C:\Windows\ccmsetup\Logs\ccmsetup.log

• Lastly,CcmSetupis exiting with return code0

Now, theSCCM client agentwill install perfectly without any issues. You can also try clearing the BITSqueueto troubleshoot the issue.

I hope the above ways help you to resolve the0x80200010error code and the server works fine.

----------------------
Regards,
tejtherh4